Mermaid 170 Setup Guide download pdf (Page 8)

mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1

Base/Raiser unit - continued:

• Lift the cabinet/raiser

assembly on top of the

base plate. Align the 3

holes in the cabinet with

the corresponding

threaded latches on the

base plate.

Cabinet hole

Cable entr

Grommet Stri

Threaded latch

• Slide the cabinet down to

the base plate just outside

the center latch and one of

the side latches. The

cabinet will then stick to

the top of the last side

latch. Note: Be sure not t

damage the Grommet Strip. It is only pressed in place and falls off easily.

• Gently pull the cabinet by the last latch

while pressing the latch, to ensure

cabinet and grommet strip to slide past.

• Check the cable entry again to ensure

free movement of the cables.

Push latch

Pull cabine

• Align the holes in perfect position, by

using the enclosed Allen key.

• Mount the 3 enclosed black 6mm hex

screws by means of the Allen key.

P/N: 20-1700-00458 Page 8 of 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Mermaid 170 Setup Guide Page 8