Mermaid 170 Setup Guide download pdf (Page 7)

mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1

Base/Raiser unit - continued:

• Mount the enclosed PSU in a suitable place

on the baseplate, by use of the adhesive

tape.

cabletie

• Connect the PSU and PC to the mains

breakout box, by use of the enclosed IEC

extension cords.

VGA (female part)

Sound

PSU

• Collect the VGA-, PSU-, sound-, optional USB- and

optional PS2 cables as a bundle and tie them

together by use of the enclosed cable ties, as shown

on the picture.

Note: Be sure to use the female part of the VGA

cable and optional PS/2 extension cables. The

sound- and optional USB cables are bipolar.

VGA

(

female

art

)

USB

• Connect the opposite end of the remaining cables to

the PC.

• Connect the supplied power cord to the breakout

box.

• If convenient, connect a network cable to the PC.

• Place the cabinet/raiser

assembly next to the base

plate, closest to the backside

of the PC.

Note: Make sure the cable

entry is pointing downwards,

making it possible to let the

power (and network) cable(s)

slide out without beeing

squeezed by the base cabinet.

Cable

entry

Threaded

latches

• Insert the cable bundle into the

raiser and push it all the way

through, making it reachable

from the top; eventually

pulling it out of the top.

P/N: 20-1700-00458 Page 7 of 16

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Mermaid 170 Setup Guide Page 7

Comments to this Manuals